Krell Illusion II

Preamplifier

Krell is one of the most dependable brand names when it comes to high-end audio systems. For years the brand has been recognized by audiophiles throughout the world as equipment that delivers clear and consistent quality in music.

Get a Free Quote
  • Free quote, no obligation
  • We pick up in the NYC Tri-State Area, Palm Beach and Denver
  • Paid on the spot

What are the specs for the Krell Illusion II?

Analog Inputs
2 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors
Digital Inputs
1 AES/EBU via XLR connector 2 coaxial via RCA connectors 2 optical via Toslink connectors
Main Outputs
1 pr. balanced via XLR connectors 1 pr. single-ended via RCA connectors
Headphone Output
1 via 3-conductor 6.35 mm (1/4 inch) connector
Control Inputs
1 RS-232 input via a 9-pin D-subminiature connector 1 remote IR detector input via a 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector
Control Outputs
2 individually programmable 12 VDC trigger outputs via 2-conductor 3.5mm connectors (30 mA maximum per output)
Input Impedance
Balanced: 40kΩ Single-ended 20kΩ
Output Impedance
Balanced: 310 Ω Single-ended: 155 Ω Headphone: <3.0Ω
Frequency Response
20 Hz to 20 kHz +0, -0.02 dB 0.25 Hz to 1.2 MHz +0, -3 dB
THD Plus Noise
Balanced Output: <0.003%, 20 Hz to 20 kHz, at 4.0 V RMS Headphone: <0.09%, 20 Hz to 20 kHz, 2.0 V RMS, 32 Ω load
Gain
Balanced: 12.0 dB 6 dB (single-ended output) Single-ended: 6.0 dB Headphone: 5.1 dB with 32 Ω load
Volume Control
Current mode, 12-bit, discrete R-2R ladder
Input Overload
> 7.0 V RMS balanced or single-ended
Output Overload
Balanced: >16 V RMS Single-ended: >8.0 V RMS Headphone: >3.0 V RMS, 32 Ω load
Signal to Noise Ratio
100 dB wideband, unweighted 107 dB ”A”-weighted, both referred to 4.0 V RMS balanced
Power Consumption
Standby: <2 Watts Power on: 40 Watts
Dimensions
17.3 in.W x 3.8 in. H x 18.3 in. D
Weight
23lbs

What else to know about the Krell Illusion II?

The Illusion II is the perfect centerpiece for a world class digital and analog audio system. Added to the normal selection of balanced and single- ended inputs are five digital inputs. The digital module features AES/EBU, coaxial, and optical digital inputs for use with streaming devices or other digital sources. **Circuitry Highlights:** The Illusion II preamplifier is a dual monaural design with the left and right channels afforded their own power supply regulation and individual circuit boards. All signal gain is executed with surface mount technology using proprietary multiple-output current mirrors with nearly 500 times the open loop linearity of other designs. Featuring 700 kHz bandwidth in a zero feedback, balanced, Krell Current Mode design, the Illusion II shares the same design philosophy as its bigger brother, the flagship Illusion preamplifier. Negative feedback is not used anywhere in the preamp, nor is it necessary. Open-loop distortion is typically less than 0.003%. The volume control is realized with a balanced resistor ladder – bandwidth and transient response of the preamp circuitry are virtually unaffected by the volume setting. The headphone circuitry is identical to the main circuitry, offering private listening with the same performance as speaker playback. **Digital Module Highlights:** The digital module supports up to 24 bit/192kHz LPCM. All digital signals are fed to an ESS Sabre DAC and then sent to Krell’s Current Mode, discrete, balanced analog circuitry. **Power Supply Highlights:** Oversized for a preamplifier, the power supply features a 95 VA transformer  and 40,000 µF of capacitance giving it the ability to respond quickly to musical demands. The large power supply improves noise rejection and renders the Illusion II impervious to all but the most severe AC voltage power fluctuations. A new eco-friendly standby mode reduces power consumption to 2W.

Brief History of Krell

Krell was founded in 1980 by Dan D’Agostino, and its equipment was quickly recognized by the audiophile community. The founder parted ways with the brand in 2009, and Krell has continued to build high-end amplifiers, preamplifiers and digital components since.

StereoBuyers has purchased tens of thousands worth Krell brand equipment since 2014, with individual buys ranging from $100 to well over $50,000. If you are moving, ready to upgrade, or have Krell equipment you do not or will not be using, why not contact us today to find out if it is worth good money?

If you are interested in selling your used Krell equipment to us in the greater NYC area or Colorado, please click here to fill out a Free Quote Form and we will get back to you. If we agree on terms, we come to meet you where you want, and pay cash.

The following images show actual Krell equipment purchased by StereoBuyers.